510209004 H2800D開料機
特點;加厚水箱與角鐵,主軸與軸套經過精磨,同軸度極高,在高速運轉時發熱量少,整個切割過程平穩無跳動現象,切面平整,適用玉石水晶,什石,黃晶,瑪瑙,玻璃等切割
技術參數： 
輸入電壓/Voltage ：AC 380V/ AC220V
電機功率/Power ：1.1KW
主軸轉速/Rotational speed：3600r/min
裝載切割片尺寸/Load cutting piece size：10英寸(250mm)
外型尺寸/Dimension ：長570mm×寬460mm×高720mm
510209004 H2800D material opener
Characteristic;Thickened water tank and Angle iron, spindle and shaft sleeve after fine grinding, coaxiality is very high, in the high-speed operation of less heat, the whole cutting process is stable no beating phenomenon, cut level, suitable for jade crystal, shi shi, topaz, agate, glass and other cutting
Technical parameters:
Voltage: AC 380V/ AC220V
Motor Power: 1.1kw
Speed: 3600r/min
Load cutting piece size: 10 inches (250mm)
Dimension: length 570mm× width 460mm× height 720m |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
工藝品加工設備
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息
